Raw material change summary curtec com

Raw Material Change Summary Curtec Com-PDF Download

  • Date:28 May 2020
  • Views:16
  • Downloads:0
  • Pages:13
  • Size:1.17 MB

Share Pdf : Raw Material Change Summary Curtec Com

Download and Preview : Raw Material Change Summary Curtec Com


Report CopyRight/DMCA Form For : Raw Material Change Summary Curtec Com


Transcription:

Acceptance, Please review both documents carefully Should you require additional information to process this. change in your quality system please contact me by e mail before June 1st 2015 If you do not. respond before this date CurTec assumes that you will formally accept this change. As of July 1st 2015 Click PackX will be manufactured from HDPE The lid will also have an. integrated gasket of the new material, You can place a final order of the current version until June 15th 2015 Valued customers who for. some reason cannot accept HDPE as raw material will still be able to order PP Click PackX but only as. a customised item and without a UN marking Our Inside Sales department can inform you about the. delivery terms of customised items, For further assistance please e mail me change control curtec com. Kind regards,Eef van Holland,Regulatory Affairs Compliance Officer. CurTec International,change control curtec com,Last revision 29 april 2015 Page 2 of 7.
Technical comparison HDPE PP, Before choosing HDPE we made sure it fulfilled all our technical and quality requirements Our R D. department has extensively tested Packo s manufactured of HDPE to make sure that they perform. equally well or even better than the original PP version The following table contains a comparison of. properties and its performance,Properties PP HDPE, Impact strength at low temperatures Fair Very good. Range of service temperature directive 0 C to 70 C 20 C to 80 C. Availability of alternative brands None Many,Chemical resistance. HDPE will score differently on the resistance for chemicals than PP In general HDPE is the preferred. material in the chemical industrial packaging, Click here to download a chemical resistance list of both materials to check suitability of either plastic. as packaging material for your particular product,There are no phthalates present in HDPE.
Polyethylene, Better impact strength especially at low temperatures. No phthalates present, More alternative brands available leading to better continuity in supply. Please contact Inside Sales for more info sales curtec com. Last revision 29 april 2015 Page 3 of 7,Characteristics and chemical resistance of TPE. In order to enable a continuous supply to our customers in future and to ensure the availability of. material for our production we changed to a different type of TPE With this new TPE CurTec can. assure that CurTec products comply with the newest EU legislation on food contact. Before choosing new materials for the manufacture of the integrated gasket CurTec made sure it. fulfilled all our technical and quality requirements like UN testing MVTR and easy of closing the lids. by performing extensive tests on Packo lids with integrated gaskets. Chemical resistance, Long term contact with oils fuels aromatics and various organic acids can cause a certain amount of. degradation or swelling of TPE We recommend testing our packaging with these substances to. determine the final effect also because the chemical resistance depends on the mechanical and. thermal conditions, We do not recommend contact with mineral and organic oils neither for the current nor for the new.
Please contact Inside Sales for more info sales curtec com. Last revision 29 april 2015 Page 4 of 7,Product codes. As of August 1st 2015 the Click PackX container and lid will be manufactured from HDPE You can use. the following product codes to order Click PackX products. Product code Product description Product code Product description. 4515 00 004 Click Pack container PP 15L white 4515 60 004 Click Pack container PE 15L white. 4520 00 004 Click Pack container PP 20L white 4520 60 004 Click Pack container PE 20L white. 4525 00 004 Click Pack container PP 25L white 4525 70 004 Click Pack container PE 25L white. 4502 00 611 Click Pack lid PP dark blue 4502 60 611 Click Pack lid PE dark blue. Please contact Inside Sales for more info sales curtec com. Last revision 29 april 2015 Page 5 of 7,15 litre Click Pack. For dimensional tolerances see table on next page,Product part Product code Description Materials. Container 4515 60 004 15 litre nestable container HDPE. Lid 4502 60 611 Screw lid HDPE,Gasket Sealing gasket TPE. Pin 4504 00 407 Tamper Evident Sealing Pin PS,Capacity Litres US Gallons.
Brimful 17 1 4 5,When closed 15 4,Weight Grams Ounces. Container 830 29 28,Lid 350 12 35,Pin 2 0 07,Total 1182 41 69. Colours Colour code PMS references,Container White 004. Lid Blue 611 2767 C,Gasket White 004,Pin Red 407 188 C. Last revision 24 April 2015 Page 1 of 2,Hazardous material information.
Hazardous material type Solids,Packaging group I II III. UN marking 1H2 X30 S B CURTEC 000066,Maximum gross mass kg X 30 Y 45 Z 67. Product identification,1 Manufacturer ID,2 Country of origin. 3 Product code,4 Food grade,5 Material type,6 Date clock. Other information, The container can be opened and closed with just a quarter turn.
The lid is locked when it passes the safety button confirmed by a click. Maximum filling temperature is 70 C 158 F, Contents must have cooled to 30 C 86 F before containers can be closed and stacked. DoC available on request,UN certificate available on request. MVTR declaration available on request,Child resistant declaration available on request. Other colours available on request,User manual available on request. Dimensional tolerance mm according to DIN16742 TG7. Over 1 3 6 10 18 30 50 80 120 180 250 315 400 500 630 800. up to 3 6 10 18 30 50 80 120 180 250 315 400 500 630 800 1000. NW 0 20 0 29 0 35 0 42 0 50 0 60 0 90 1 25 1 45 1 60 1 80 2 60 3 50 4 00 4 50 5 00. Weight tolerance, All products have a tolerance of 4 on the initial weight mentioned on this data sheet.
2015 Property of CurTec International B V All rights explicitly reserved it is not allowed to copy or communicate to other. parties without written consent of CurTec,Last revision 24 April 2015 Page 2 of 2. 20 litre Click Pack,For dimensional tolerances see table on next page. Product part Product code Description Materials, Container 4520 60 004 20 litre nestable container HDPE. Lid 4502 60 611 Screw lid HDPE,Gasket Sealing gasket TPE. Pin 4504 00 407 Tamper Evident Sealing Pin PS,Capacity Litres US Gallons.
Brimful 21 9 5 8,When closed 20 5 3,Weight Grams Ounces. Container 1008 35 56,Lid 350 12 35,Pin 2 0 07,Total 1360 47 97. Colours Colour code PMS references,Container White 004. Lid Blue 611 2767 C,Gasket White 004,Pin Red 407 188 C. Last revision 24 April 2015 Page 1 of 2,Hazardous material information.
Hazardous material type Solids,Packaging group I II III. UN marking 1H2 X30 S B CURTEC 000066,Maximum gross mass kg X 30 Y 45 Z 67. Product identification,1 Manufacturer ID,2 Country of origin. 3 Product code,4 Food grade,5 Material type,6 Date clock. Other information, The container can be opened and closed with just a quarter turn.
The lid is locked when it passes the safety button confirmed by a click. Maximum filling temperature is 70 C 158 F, Contents must have cooled to 30 C 86 F before containers can be closed and stacked. DoC available on request,UN certificate available on request. MVTR declaration available on request,Child resistant declaration available on request. Other colours available on request,User manual available on request. Dimensional tolerance mm according to DIN16742 TG7. Over 1 3 6 10 18 30 50 80 120 180 250 315 400 500 630 800. up to 3 6 10 18 30 50 80 120 180 250 315 400 500 630 800 1000. NW 0 20 0 29 0 35 0 42 0 50 0 60 0 90 1 25 1 45 1 60 1 80 2 60 3 50 4 00 4 50 5 00. Weight tolerance, All products have a tolerance of 4 on the initial weight mentioned on this data sheet.
2015 Property of CurTec International B V All rights explicitly reserved it is not allowed to copy or communicate to other. parties without written consent of CurTec,Last revision 24 April 2015 Page 2 of 2. 25 litre Click Pack,For dimensional tolerances see table on next page. Product part Product code Description Materials, Container 4525 70 004 25 litre nestable container HDPE. Lid 4502 60 611 Screw lid HDPE,Gasket Sealing gasket TPE. Pin 4504 00 407 Tamper Evident Sealing Pin PS,Capacity Litres US Gallons.
Brimful 26 7 7,When closed 25 6 6,Weight Grams Ounces. Container 1177 41 52,Lid 350 12 35,Pin 2 0 07,Total 1529 53 93. Colours Colour code PMS references,Container White 004. Lid Blue 611 2767 C,Gasket White 004,Pin Red 407 188 C. Last revision 24 April 2015 Page 1 of 2,Hazardous material information.
Hazardous material type Solids,Packaging group I II III. UN marking 1H2 X30 S B CURTEC 000066,Maximum gross mass kg X 30 Y 45 Z 67. Product identification,1 Manufacturer ID,2 Country of origin. 3 Product code,4 Food grade,5 Material type,6 Date clock. Other information, The container can be opened and closed with just a quarter turn.
The lid is locked when it passes the safety button confirmed by a click. Maximum filling temperature is 70 C 158 F, Contents must have cooled to 30 C 86 F before containers can be closed and stacked. DoC available on request,UN certificate available on request. MVTR declaration available on request,Child resistant declaration available on request. Other colours available on request,User manual available on request. Dimensional tolerance mm according to DIN16742 TG7. Over 1 3 6 10 18 30 50 80 120 180 250 315 400 500 630 800. up to 3 6 10 18 30 50 80 120 180 250 315 400 500 630 800 1000. NW 0 20 0 29 0 35 0 42 0 50 0 60 0 90 1 25 1 45 1 60 1 80 2 60 3 50 4 00 4 50 5 00. Weight tolerance, All products have a tolerance of 4 on the initial weight mentioned on this data sheet.
2015 Property of CurTec International B V All rights explicitly reserved it is not allowed to copy or communicate to other. parties without written consent of CurTec,Last revision 24 April 2015 Page 2 of 2. Will both PP and HDPE be available as stock items, No after July 1st 2015 PP Click PackX products are no longer stock items so you will have to respect. the MOQ of customised items and accept a longer delivery time CurTec will also no longer maintain. the UN marking on the PP containers so if you use Click PackX for hazmat then we advise you to. switch to the HDPE version For a last buy option of the PP Click PackX in the old version please. respect the date in the change control notification letter Please contact Inside Sales for the delivery. conditions of customised items, Does the HDPE lid fit a PP container and vice versa. No the dimensions of HDPE items are different from PP items and they cannot be combined. How can I check which raw material is used to manufacture a Click PackX item. Each Click PackX item bears a material recycle logo moulded into the base of a container or inside of a. lid The recycle logo represents the raw material of which the Click PackX item is made. Will CurTec take back stock of PP Click Pack X products from customers that wish to change to. HDPE immediately, CurTec will not take back stock from customers However we are open to mediate a solution in case. you want to change to HDPE but your stock prevents this Please contact Inside Sales for more info. Is CurTec prepared to deliver other than batch quantities to customers who wish to balance their. stock of PP items, CurTec only agrees to deliver batch quantities However we are open to mediate a solution in case.
your stock levels of PP items do not level out Please contact Inside Sales for more info. Will HDPE Click PackX items be available at the same prices as PP items. Yes pricing for HDPE items is similar to PP items, Will the packaging units of HDPE Click PackX differ from the PP version. No the packaging units will remain the same, Is there any difference in chemical resistance of HDPE and PP. Yes there are certain chemicals to which HDPE responds differently than PP You can learn more. about the chemical resistance of HDPE vs PP on page 3 of this document. Is there any difference in chemical resistance of the current and the new TPE. Yes there are certain chemicals to which the new TPE responds differently Read page 4 of this. document to learn about chemical resistance of TPE or contact Inside Sales in case you have. Will the current TPE material be available after the change. No after July 1st the current TPE material will no longer be available because the material does not. comply with the regulations for Food Contact,Will the UN markings change due to these changes. No the UN markings of the Click PackX will stay the same. Last revision 29 april 2015 Page 6 of 7,CurTec International. Spoorlaan Noord 92,5121 WX Rijen,The Netherlands,UK Ireland 44 20 3514 4624.
North America 1 908 450 98 16,All other countries 31 88 808 2000. curtec en curtec com,curtec com,Last revision 29 april 2015 Page 7 of 7. Raw material change summary The following information concerns all our valued customers who buy or intend to buy Click PackX according to DIN16742 TG7

Related Books