HUAWEI AMPR

Huawei Ampr-PDF Download

  • Date:01 Feb 2020
  • Views:54
  • Downloads:0
  • Pages:518
  • Size:2.37 MB

Share Pdf : Huawei Ampr

Download and Preview : Huawei Ampr


Report CopyRight/DMCA Form For : Huawei Ampr


Transcription:

Quidway S3000 EI Series Ethernet Switches,Command Manual. Manual Version T2 081929 20050625 C 1 04,Product Version VRP3 10. BOM 31190229, Huawei Technologies Co Ltd provides customers with comprehensive technical support. and service If you purchase the products from the sales agent of Huawei Technologies Co. Ltd please contact our sales agent If you purchase the products from Huawei. Technologies Co Ltd directly Please feel free to contact our local office customer care. center or company headquarters,Huawei Technologies Co Ltd. Address Administration Building Huawei Technologies Co Ltd. Bantian Longgang District Shenzhen P R China,Postal Code 518129.
Website http www huawei com,Huawei Technologies Proprietary. Copyright 2005 Huawei Technologies Co Ltd,All Rights Reserved. No part of this manual may be reproduced or transmitted in any form or by any. means without prior written consent of Huawei Technologies Co Ltd. Trademarks, HUAWEI C C08 EAST8000 HONET ViewPoint INtess ETS DMC. TELLIN InfoLink Netkey Quidway SYNLOCK Radium M900 M1800. TELESIGHT Quidview Musa Airbridge Tellwin Inmedia VRP DOPRA. iTELLIN HUAWEI OptiX C C08 iNET NETENGINE OptiX iSite U SYS iMUSE. OpenEye Lansway SmartAX infoX and TopEng are trademarks of Huawei. Technologies Co Ltd, All other trademarks and trade names mentioned in this manual are the property of. their respective holders, The information in this manual is subject to change without notice Every effort has.
been made in the preparation of this manual to ensure accuracy of the contents. but all statements information and recommendations in this manual do not. constitute the warranty of any kind express or implied. Huawei Technologies Proprietary,About This Manual,Release Notes. The product version that corresponds to the manual is VRP3 10. Related Manuals, The following manuals provide more information about the Quidway S3000 EI Series. Ethernet Switches,Manual Content, Quidway S3026C PWR Introduces the system installation booting. Ethernet Switch Installation configuration and maintenance of S3026C PWR. Manual Ethernet Switch, Quidway S3000 EI Series Introduces the system installation booting. Ethernet Switches Installation configuration and maintenance of S3000 EI. Manual Series Ethernet Switches,Introduces such modules as getting started port.
Quidway S3000 EI Series VLAN multicast QoS ACL integrated. Ethernet Switches Operation management STP security network protocols. Manual remote power feeding and system,management,Organization. Quidway S3000 EI Series Ethernet Switches Command Manual consists of the. following parts,z Getting Started, This module introduces the commands used for accessing the Ethernet Switch. This module introduces the commands used for configuring Ethernet port link. aggregation and port isolation, This module introduces the commands used for configuring VLAN. z Multicast,Huawei Technologies Proprietary, This module introduces the commands used for configuring multicast protocols. This module introduces the commands used for configuring QoS ACL. z Integrated Management, This module introduces the commands used for integrated management.
This module introduces the commands used for configuring STP. z Security, This module introduces the commands used for configuring 802 1X AAA. RADIUS and HABP,z Network Protocol, This module introduces the commands used for configuring network protocol. including ARP DHCP snooping and IP performance,z System Management. This module introduces the commands used for system management and. maintenance,z Remote Power feeding, This module introduces remote power feeding configuration. z Appendix, This appendix lists all the commands that appear in the manuals.
Intended Audience,The manual is intended for the following readers. z Network engineers,z Network administrators, z Customers who are familiar with network fundamentals. Conventions,The manual uses the following conventions. Huawei Technologies Proprietary,I General conventions. Convention Description,Arial Normal paragraphs are in Arial.
Boldface Headings are in Boldface,Courier New Terminal Display is in Courier New. II Command conventions,Convention Description, Boldface The keywords of a command line are in Boldface. italic Command arguments are in italic, Items keywords or arguments in square brackets are. Alternative items are grouped in braces and separated by. vertical bars One is selected, Optional alternative items are grouped in square brackets. and separated by vertical bars One or none is selected. Alternative items are grouped in braces and separated by. x y vertical bars A minimum of one or a maximum of all can be. Optional alternative items are grouped in square brackets. x y and separated by vertical bars Many or none can be. A line starting with the sign is comments,III GUI conventions.
Convention Description, Button names are inside angle brackets For example click. the OK button, Window names menu items data table and field names. are inside square brackets For example pop up the New. User window, Multi level menus are separated by forward slashes For. example File Create Folder,Huawei Technologies Proprietary. IV Keyboard operation,Format Description, Press the key with the key name inside angle brackets For.
example Enter Tab Backspace or A, Press the keys concurrently For example Ctrl Alt A. means the three keys should be pressed concurrently. Press the keys in turn For example Alt A means the. two keys should be pressed in turn,V Mouse operation. Action Description, Press and hold the primary mouse button left mouse. button by default, Select and release the primary mouse button without. moving the pointer, Press the primary mouse button twice continuously and.
Double Click,quickly without moving the pointer, Press and hold the primary mouse button and move the. pointer to a certain position,VI Symbols, Eye catching symbols are also used in the manual to highlight the points worthy of. special attention during the operation They are defined as follows. Caution Warning Means reader be extremely careful during the operation. Note Means a complementary description,Huawei Technologies Proprietary. Command Manual Getting Started, Quidway S3000 EI Series Ethernet Switches Table of Contents. Table of Contents,Chapter 1 Logging in Switch Commands 1 1.
1 1 Logging in Switch Commands 1 1,1 1 1 authentication mode 1 1. 1 1 2 auto execute command 1 2,1 1 3 command privilege level 1 3. 1 1 4 databits 1 4,1 1 5 display history command 1 4. 1 1 6 display user interface 1 5,1 1 7 display users 1 6. 1 1 8 flow control 1 7,1 1 9 free user interface 1 7.
1 1 10 header 1 8,1 1 11 history command max size 1 10. 1 1 12 idle timeout 1 10,1 1 13 language mode 1 11. 1 1 14 lock 1 12,1 1 15 parity 1 12,1 1 16 protocol inbound 1 13. 1 1 17 quit 1 13,1 1 18 return 1 14,1 1 19 screen length 1 14. 1 1 20 send 1 15,1 1 21 service type 1 16,1 1 22 set authentication password 1 17.
1 1 23 shell 1 18,1 1 24 speed 1 19,1 1 25 stopbits 1 19. 1 1 26 super 1 20,1 1 27 super password 1 21,1 1 28 sysname 1 22. 1 1 29 system view 1 22,1 1 30 telnet 1 23,1 1 31 user interface 1 23. 1 1 32 user privilege level 1 24,Chapter 2 System IP Configuration Commands 2 1. 2 1 System IP Configuration Commands 2 1,2 1 1 description 2 1.
Huawei Technologies Proprietary,Command Manual Getting Started. Quidway S3000 EI Series Ethernet Switches Table of Contents. 2 1 2 display interface vlan interface 2 1,2 1 3 display ip host 2 2. 2 1 4 display ip interface vlan interface 2 3,2 1 5 display ip routing table 2 4. 2 1 6 display ip routing table acl 2 5,2 1 7 display ip routing table ip address 2 9. 2 1 8 display ip routing table ip address1 ip address2 2 11. 2 1 9 display ip routing table ip prefix 2 12,2 1 10 display ip routing table protocol 2 13.
2 1 11 display ip routing table radix 2 14,2 1 12 display ip routing table statistics 2 15. 2 1 13 display ip routing table verbose 2 16,2 1 14 interface vlan interface 2 17. 2 1 15 ip address 2 18,2 1 16 ip host 2 18,2 1 17 ip route static 2 19. 2 1 18 ip route static default preference 2 20,2 1 19 shutdown 2 21. Huawei Technologies Proprietary,Command Manual Getting Started.
Quidway S3000 EI Series Ethernet Switches Chapter 1 Logging in Switch Commands. Chapter 1 Logging in Switch Commands,1 1 Logging in Switch Commands. 1 1 1 authentication mode,authentication mode password scheme none. User interface view,password Perform local password authentication. scheme Perform local or remote authentication of username and password. none Perform no authentication,Description, Using authentication mode command you can configure the authentication method. for login user, This command with the password parameter indicates to perform local password.
authentication that is you need to configure a login password using the set. authentication password cipher simple password command. This command with the scheme parameter indicates to perform authentication of local. or remote username and password The type of the authentication depends on your. configuration For detailed information see Security section. By default users logging in via the Console port do not need to pass any terminal. authentication whereas the password is required for authenticating the Modem and. Telnet users when they log in,Configure local password authentication. Quidway ui aux0 authentication mode password,Huawei Technologies Proprietary. Command Manual Getting Started, Quidway S3000 EI Series Ethernet Switches Chapter 1 Logging in Switch Commands. 1 1 2 auto execute command,auto execute command text. undo auto execute command,User interface view, text Specifies the command to be run automatically.
Description, Using auto execute command command you can configure to automatically run a. specified command When a user logs in the command configured will be executed. automatically Using undo auto execute command command you can configure not. to run the command automatically, This command is usually used to configure the telnet command on the terminal which. will connect the user to a designated device automatically. By default auto run is disabled, z If you execute this command the user interface can no longer be used to perform. routine configurations on the local system Therefore use caution when using this. z Ensure that you will be able to log into the system in some other way to cancel the. configuration before you configure the auto execute command command and. save the configuration, Configure to automatically telnet 10 110 100 1 after the user logs in via VTY 0. Quidway ui vty0 auto execute command telnet 10 110 100 1. Huawei Technologies Proprietary,Command Manual Getting Started.
Quidway S3000 EI Series Ethernet Switches Chapter 1 Logging in Switch Commands. 1 1 3 command privilege level,command privilege level level view view command. undo command privilege view view command,System view. level Specifies the command level ranging from 0 to 3. view Specifies the command view which can be any of the views supported by the. command Specifies the command to be configured,Description. Using command privilege level command you can configure the priority of the. specifically command of the specifically view Using undo command privilege view. command you can restore the default command priority. The command levels include visit monitoring system and management which are. identified as 0 through 3 respectively The network administrator can customize the. command levels as needed, When users log into the switch the commands they can use depend jointly on the user. level settings and the command level settings on the user interface If the two types of. settings differ, z For the users using AAA RADIUS authentication the commands they can use are.
determined by the user level settings For example if a use is set to level 3 and the. command level on the VTY 0 user interface is level 1 he or she can only use the. commands of level 3 or lower when logging into the switch from the VTY 0 user. z For the users using RSA public key authentication the commands they can use. are determined by the command level settings on the user interface. By default ping tracert and telnet are at visit level 0 display and debugging are at. monitoring level 1 all configuration commands are at system level 2 and FTP. XMODEM TFTP and commands for file system operations are at management level. Configure the precedence of the command interface as 0. Quidway command privilege level 0 view system interface. Huawei Technologies Proprietary,Command Manual Getting Started. Quidway S3000 EI Series Ethernet Switches Chapter 1 Logging in Switch Commands. 1 1 4 databits,databits 7 8,undo databits,User interface view. 7 The data bits are 7,8 The data bits are 8,Description. Using databits command you can configure the data bits for AUX Console port. Using undo databits command you can restore the default bits of the AUX Console. This command can only be performed in AUX user interface view. Command Manual Manual Version T2 081929 20050625 C 1 04 Product Version VRP3 10 BOM 31190229 Huawei Technologies Co Ltd provides customers with comprehensive technical support and service If you purchase the products from t he sales agent of Huawei Technologies Co Ltd please contact our sales agent If you purchase the products from Huawei

Related Books