Global Supplier Manual Appendix D Daimler AG Customer

Global Supplier Manual Appendix D Daimler Ag Customer-PDF Download

  • Date:02 Jul 2020
  • Views:1
  • Downloads:0
  • Pages:6
  • Size:511.40 KB

Share Pdf : Global Supplier Manual Appendix D Daimler Ag Customer

Download and Preview : Global Supplier Manual Appendix D Daimler Ag Customer


Report CopyRight/DMCA Form For : Global Supplier Manual Appendix D Daimler Ag Customer


Transcription:

TABLE OF CONTENTS,TABLE OF CONTENTS 2,Scope of this document 3. Responsibility 3, 1 0 Customer Specific Requirements IATF16949 section 4 3 2 3. 2 0 Quality Management System Documentation IATF16949 section 7 5 1 1 3. 3 0 Record Retention IATF16949 section 7 5 3 2 1 3. 4 0 Customer Designated Special Characteristics IATF16949 section 8 2 3 1 2 3. 5 0 Development of Products with Embedded Software IATF16949 section 8 3 2 3 3. 6 0 Special Characteristics IATF16949 section 8 3 3 3 4. 7 0 Product Approval Process IATF16949 section 8 3 4 4 4. 8 0 Design and Development Changes IATF16949 section 8 3 6 1 4. 9 0 Customer Directed Sources IATF16949 section 8 4 1 3 5. 10 0 Statutory and Regulatory Requirements IATF16949 section 8 4 2 2 5. 11 0 Supplier Quality Management System Requirements IATF16949 section 8 4 2 3 5. 12 0 Identification and Traceability IATF16949 section 8 5 2 1 5. 13 0 Control of Changes IATF16949 section 8 5 6 1 5. 14 0 Layout Inspection and Functional Testing IATF16949 section 8 6 2 5. 15 0 Verification and acceptance of conformity of externally provided products and service IATF 16949 section. 16 0 Statutory and Regulatory Conformity IATF16949 section 8 6 5 6. 17 0 Customer Authorization for Concession IATF16949 section 8 7 1 1 6. 18 0 Customer Notification IATF16949 section 8 7 1 6 6. 19 0 Regarding Sustainability Health and Safety 6,20 0 Preservation IATF16949 section 8 5 4 1 6. History of the revision 6,Scope of this document, The scope of this document is to ensure compliance to customer requirement by sub suppliers of SMR Automotive. who are supplying for any Daimler AG DAG project This document is listing requirements for these suppliers in. addition to standard IATF16949 requirements and in addition to standard SMR requirements In case of difference. between standard SMR requirement and Daimler requirement the strongest shall be binding. Responsibility, Suppliers who are supplier for SMR of a component for a Daimler product shall meet all requirements listed in this.
document during the whole project lifetime This includes but not limited to. Regularly check for updates of this document on www smr automotive com. Ensure availability and awareness of related Daimler standards and requirements mentioned in this document. Ensure requirements are met in their supply chain, 1 0 Customer Specific Requirements IATF16949 section 4 3 2. Supplier shall be aware consider and meet DAG MBST 2016 requirements all sections which are interpretable for. sub Tier 1 suppliers, 2 0 Quality Management System Documentation IATF16949 section 7 5 1 1. Supplier shall be aware consider and meet MBST 14 06 section 1 requirements This is in line with SMR Global. Supplier Manual and also with IATF16949 requirements stating that sub Tier 1 suppliers shall develop their Quality. System with the ultimate goal of having 3rd party IATF16949 certification. 3 0 Record Retention IATF16949 section 7 5 3 2 1, In case of Daimler related documentation supplier shall meet MBST 13 18 section 7 the storage periods shall be. based on VDA Volume 1 Following the discontinuation of series production the PPA Production Part Approval. process documents shall be archived for 15 years by the supplier and submitted on request. 4 0 Customer Designated Special Characteristics IATF16949 section 8 2 3 1 2. Supplier shall meet the requirements of MBST 13 18 section 5 paragraph 8. In deviation from VDA Volume 2 the following requirements apply to the DS DZ characteristics specified in the. specification documents e g drawings CAD data records. Short term process capability Cmk 2 00,Long term process capability Cpk 1 67. The procedure for special processes shall be as described in MBST14. Supplier shall meet MBST 14 06 section 5 paragraph 3 6 and 7. The supplier is responsible for determining and properly defining the special characteristics e g safety certification. functionally and process relevant in accordance with the specifications requirement specifications or other Daimler. data as well as for the suitable optimization of production systems processes and test methods If in the case of a. product defect it is not possible to exclude risk to life or health during use of the product the supplier shall do. everything within its power to exclude the possibility of defective deliveries. If a product feature cannot be demonstrated with process capability figures e g for specific processes e g welding. heat treatment casting proof must be provided by way of secondary features and or a 100 test must be. employed In such cases Daimler can demand that suppliers apply different suitable methods of providing evidence. for process security specific to components in series production Suppliers of electrical and electronic components. shall implement suitable indicators to detect conspicuous trends and anomalies e g anomaly tests such as Parts. Average Analysis No parts subject to anomalies shall be supplied to Daimler. 5 0 Development of Products with Embedded Software IATF16949 section 8 3 2 3. Supplier shall meet the requirements of MBST 14 06 section3 paragraph 2 7 as follows Daimler is entitled to. audit and evaluate the SMR s QM system and quality assurance measures or to have these audited and evaluated. by a third party commissioned by Daimler This can be done as part of an audit e g technical audit of SMR. following prior announcement As part of its deliveries SMR must also enable its sub suppliers to be audited. by Daimler or a third party commissioned by Daimler SMR consents to assist Daimler in identifying weaknesses. in the sub supplier structure Optimization of the weaknesses which are ascertained is the responsibility of the. supplier Daimler can stipulate quality assurance measures. Suppliers that develop and supply software also in combination with hardware must observe the relevant valid. version of the ISO IEC 15504 or Automotive SPICE standards On request Daimler must be informed of. measuring variables in the software development process e g number of errors per lines of code error distribution. over development phases efficiency measurement in various phases of software development test coverage such. as C1 or equivalent measuring variables, The maturity of the software development process must be verified through an assessment in accordance with.
ISO IEC 15504 or Automotive SPICE The supplier must provide a results protocol according to SPICE or. Automotive SPICE on request, Without being requested the supplier must submit at least a Level 2 along with a results protocol according to. Automotive SPICE during the tendering procedure The underlying assessment must not be older than 12 months. After awarding the supplier must verify Automotive SPICE assessment level 3 according to ISO IEC 15504 1 This. level should be either available at the start of the project or should be verified at the early stages of the project. maximum one year after awarding, The execution and scope of the assessment and qualification of the assessors must meet the requirements of the. standardization activities of the software manufacturer initiative HIS and Automotive SPICE In the event of. significant deviations from these requirements the assessment is invalid In this case reassessment must be carried. out by an independent third party who did not take part in the invalid assessment The costs of this reassessment are. borne by the supplier Daimler and SMR has the right to carry out an assessment itself according to ISO IEC 15504. or Automotive SPICE, 6 0 Special Characteristics IATF16949 section 8 3 3 3. Supplier shall meet the requirements of MBST 13 18 section 5 paragraph 3 and 7 Prior to the PPA process the. documents specific to the sampling scope possible part bundles and the number of samples required among other. things shall be specified as part of sampling planning including the submission stage In addition to technical. sampling Q status variant sampling F status shall also take place for parts distinguished by supplementary code. 2 colors languages etc, The relevant product and process characteristics for which capability studies shall be carried out shall be. coordinated with SMR Until process capability has been verified the characteristics shall be checked 100 by the. 7 0 Product Approval Process IATF16949 section 8 3 4 4. Supplier shall meet the requirements of MBST 13 18 complete Production Process and Product Approval. section if interpretable for sub tier1 suppliers, 8 0 Design and Development Changes IATF16949 section 8 3 6 1.
Supplier shall meet the requirements of MBST 13 18 section 4. SMR Purchasing department employees responsible for series production approval shall be notified of all production. process and product modifications Unless otherwise agreed the procedure is according to the following matrix. Within the scope of sampling of new and of modified parts supplier is obliged to set the material data sheets in IMDS. The ID number for the IMDS data record has to be defined on the initial sample cover sheet and in the. corresponding Annex material data sheets IMDS The regulations of MBST 36 especially with regard to. Confirmation of Adherence to Substance Bans have to be observed by supplier. AND in case of required by Daimler supplier shall meet MBST 13 18 section 6 in addition to SMR Global Supplier. Manual PPAP requirements, 9 0 Customer Directed Sources IATF16949 section 8 4 1 3. Supplier shall meet MBST 14 06 section 6 requirements Under consideration of the inspections carried out at the. supplier s premises in accordance with MBST the inspection carried out at Daimler is restricted to the comparison of. delivery note data with the goods labels checking the number of load units and inspecting external transportation. damage which is clearly visible on the packaging, There are no more far reaching examination obligations for Daimler. Daimler and SMR is entitled to participate in inspections appraisals reviews or tests carried out by the supplier and. its sub suppliers to have these observed by third parties authorized by Daimler or SMR or following prior. coordination to conduct such inspections itself on the premises of the supplier and its sub suppliers or to have these. carried out by authorized third parties Daimler and SMR has the right to inspect all development documents. software incl source code for the purpose of analysis e g ascertainment of metrics and documentation which. accompanies production relating to Daimler, 10 0 Statutory and Regulatory Requirements IATF16949 section 8 4 2 2. Supplier shall meet MBST 14 06 section 2 complete Legal and Regulatory Requirements for Certifications The. supplier is obliged to meet all legal or regulatory requirements and to take the necessary measures for acquiring and. maintaining the necessary product related and or location related certification activities in good time e g application. of auditing of production sites technical tests of parts The aforementioned requirements are dependent on the. market or the markets for which the deliveries are destined for. The supplier shall ensure independently and on his own responsibility that the related documents are up to date and. valid The supplier shall transfer those documents to SMR on time without the need of a request by SMR. The supplier must ensure delivery of parts which meet all legal or regulatory requirements over the whole life cycle. i e even after the end of production EOP of the vehicle during the period of spare parts supply until revoked incl. recertification Upon becoming aware of any change of the production process and or of the company name and or. of the address of a production site also with regard to sub suppliers that may have any effect on the validity of the. certifications e g relocating production facilities tools or entire production sites a change of address. decommissioning of production sites end of life inventories a suppliers or name changes the supplier shall. immediately notify SMR of said change, 11 0 Supplier Quality Management System Requirements IATF16949 section 8 4 2 3. Supplier shall meet the requirements of MBST 14 06 section1 paragraph 2 SMR will set up its QM system and. suppliers are also required to comply with the requirements of the MBST. 12 0 Identification and Traceability IATF16949 section 8 5 2 1. Requirements of designations are specified by SMR Engineering in an appropriate document which is in line with. MBST 14 06 section5 paragraph 8 Supplier to be aware and meet the requirements of both. 13 0 Control of Changes IATF16949 section 8 5 6 1, Supplier shall meet MBST 13 18 section 4 requirements please see the same requirement listed above at IATF.
16949 section 8 3 6 1, 14 0 Layout Inspection and Functional Testing IATF16949 section 8 6 2. Supplier shall meet the requirement of MBST 14 06 section5 paragraph 9 The supplier is obliged to check. annually whether its deliveries meet Daimler s and SMR s specifications including dimensions material reliability. legal specifications environmental and production control plan requalification The supplier evaluates documents. and archives the results These must be made available to Daimler and SMR on request Any deviation from this. paragraph must be agreed in writing between the supplier and SMR or Daimler. Verification and Acceptance of Conformity of Externally Provided Products and Services IATF16949 section 8 6 4. Supplier shall meet the requirement of MBST 14 06 section 3 paragraph 1 details are listed above at IATF16949. Ensure requirements are met in their supply chain 1 0 Customer Specific Requirements IATF16949 section 4 3 2 Supplier shall be aware consider and meet DAG MBST 2016 requirements all sections which are interpretable for sub Tier 1 suppliers 2 0 Quality Management System Documentation IATF16949 section 7 5 1 1

Related Books