DNVGL ST E272 2 7 2 Offshore service modules

Dnvgl St E272 2 7 2 Offshore Service Modules-PDF Download

  • Date:29 Mar 2020
  • Views:92
  • Downloads:6
  • Pages:50
  • Size:775.01 KB

Share Pdf : Dnvgl St E272 2 7 2 Offshore Service Modules

Download and Preview : Dnvgl St E272 2 7 2 Offshore Service Modules


Report CopyRight/DMCA Form For : Dnvgl St E272 2 7 2 Offshore Service Modules


Transcription:

DNV GL standards contain requirements principles and acceptance criteria for objects personnel. organisations and or operations,DNV GL AS February 2016. Any comments may be sent by e mail to rules dnvgl com. This service document has been prepared based on available knowledge technology and or information at the time of issuance of this document The use of this. document by others than DNV GL is at the user s sole risk DNV GL does not accept any liability or responsibility for loss or damages resulting from any use of. this document,CHANGES CURRENT,Changes current, This document supersedes DNV Standard for Certification 2 7 2 May 2013. Text affected by the main changes in this edition is highlighted in red colour However if the changes. involve a whole chapter section or sub section normally only the title will be in red colour. On 12 September 2013 DNV and GL merged to form DNV GL Group On 25 November 2013 Det Norske. Veritas AS became the 100 shareholder of Germanischer Lloyd SE the parent company of the GL Group. and on 27 November 2013 Det Norske Veritas AS company registration number 945 748 931 changed its. name to DNV GL AS For further information see www dnvgl com Any reference in this document to Det. Norske Veritas AS Det Norske Veritas DNV GL Germanischer Lloyd SE GL Group or any other. legal entity name or trading name presently owned by the DNV GL Group shall therefore also be considered. a reference to DNV GL AS,Main changes February 2016. Addition of 2 7 2 in title of document,All sections. Reference to DNV has been changed to DNV GL, Reference to DNV Offshore Service Module Certificate has been changed to DNV GL product certificate.
All sections except Sec 3 Addition of guidance notes comments or clarification of existing. requirements within the standard,Sec 3 Structural technical requirements. Sec 3 has been restructured to present requirements in a more user friendly format. Editorial corrections, In addition to the above stated main changes editorial corrections may have been made. Standard DNVGL ST E272 Edition February 2016 Page 3. CHANGES CURRENT 3,Sec 1 Introduction 7, 1 1 Relationship with other standards codes and regulations 7. 1 1 1 The International Maritime Organization IMO 7. 1 1 2 DNV Rules for Classification of Ships DNV Offshore Standards 7. 1 1 3 Relationship to previous revisions of this standard 7. Sec 2 General 8,2 1 Objective 8,2 2 Definitions 8, 2 3 Referenced class rules regulations and standards 10. 2 4 Abbreviations 11,Sec 3 Structural technical requirements 12.
3 1 General 12,3 2 Lifting 13,3 2 1 Additional fittings for lifting 13. 3 3 Offshore installation induced loads 13,3 3 1 General 13. 3 3 2 External environmental loads 14,3 3 3 Other in service accidental loads 16. 3 4 Securing to offshore installation 16,3 5 Fatigue 16. Sec 4 Safety related technical requirements 17,4 1 General 17.
4 1 1 Detailed requirements 17,4 1 2 Hazardous vs safe area 17. 4 1 3 Alternative solutions 17,4 2 Environmental requirements 17. 4 3 Noise 18,4 4 Asbestos declarations 18,4 5 Electrical systems 18. 4 5 1 Safety requirements 18,4 5 2 Components and equipment 18. 4 5 3 Arrangement location of equipment 19,4 5 4 Ingress protection 20.
4 5 5 Electrical system main characteristics 20,4 5 6 Earthing 20. 4 5 7 Cables 22,4 5 8 Batteries 24,4 5 9 Equipment located external to module 24. 4 5 10 Programmable controllers 25,4 6 Ignition prevention 25. 4 6 1 Requirements for electrical equipment exposed to hazardous. atmospheres 25,4 7 Fire gas detection 26,4 7 1 Gas detection and alarm system 26. 4 7 2 Fire detection and alarm system 27, 4 7 3 Emergency shutdown initiated from offshore installation 28.
Standard DNVGL ST E272 Edition February 2016 Page 4. 4 8 Communications 28, 4 8 1 Public address and general alarm system PA GA 28. 4 8 2 Telephone two way communication 28,4 9 Fire fighting 28. 4 9 1 Portable extinguishers 29,4 9 2 Fixed extinguishing systems 29. 4 10 Passive fire protection 30,4 10 1 General 30,4 10 2 Restricted use of combustible materials 31. 4 11 Escape 31,4 11 1 Doors 31,4 11 2 Emergency exits and escape routes 31.
4 11 3 Emergency lighting 32,4 12 Heating ventilation and air conditioning 32. 4 12 1 Air inlets outlets 32,4 12 2 Natural ventilation 32. 4 12 3 Mechanical ventilation 32,4 12 4 Over pressurised ventilation systems 34. Sec 5 Module Service Types 36,5 1 Modules for important services 36. 5 2 Module types 37, 5 3 Specific requirements for functional groups 38.
5 3 1 Combustion engines 38,5 3 2 Air Compressors 39. 5 3 3 Steam generators 39,5 3 4 Well intervention equipment 41. 5 3 5 Diving systems 41,5 3 6 Hydrocarbon containing equipment 41. 5 3 7 Drilling service equipment 41, 5 4 Offshore installations not intended for hydrocarbon related activities 42. 5 4 1 Inclination on non important service equipment 42. 5 4 2 Batteries 42,5 4 3 Gas detection 42,5 4 4 Combustion engines and steam generators 42.
Sec 6 Installation and hook up 43,6 1 General 43, 6 2 Interfaces between module and offshore installation 43. 6 2 1 Signal from module or equipment to CCR 43,6 2 2 Signals from CCR to module or equipment 43. 6 3 Instructions for hook up installation 44,Sec 7 Marking and instructions 45. 7 1 Information plate 45,7 2 Marking of equipment 45. Sec 8 Approval and certification procedures 47,8 1 General 47.
8 2 Application for certification 47,8 3 Approval schemes 47. 8 4 Design assessment 48,8 5 Survey and testing 48. Standard DNVGL ST E272 Edition February 2016 Page 5. 8 6 Certification of existing containers 48,8 7 Retention of certificates 48. 8 7 1 Maintenance of certificates periodic inspections 48. 8 7 2 Modifications 49,8 7 3 Withdrawal of certification 49. Standard DNVGL ST E272 Edition February 2016 Page 6. SECTION 1 INTRODUCTION, This standard for certification has been issued in order to collect into one document a suitable collection of.
requirements with relevant appropriate references to various international codes and standards which are. applicable to the design and installation of offshore service modules. Offshore service modules are designed to perform temporary services on offshore installations and may be. placed on different offshore installations and units in different national waters. This standard for certification applies basic requirements from other DNV GL rules and standards to offshore. service modules and has been based primarily on recognised practices for the offshore industry It is. intended that the standard will be suitable for global usage It should however be noted that some shelf. or flag states may have stricter or other requirements than those given in this standard. Modules designed and manufactured in compliance with DNV 2 7 2 are intended to meet the basic. requirements of SOLAS MODU code and DNV Offshore Standards relevant to the functions of the equipment. and as applicable at date this standard was issued All subject to adequate installation of the equipment. when located on the offshore installation which is out with the scope of this standard. DNV DNV GL and associated logos are registered trademarks of DNV GL AS and may not be used without. prior permission of DNV GL, 1 1 Relationship with other standards codes and regulations. 1 1 1 The International Maritime Organization IMO, The requirements in the SOLAS Code apply for Offshore Service Modules utilised on ships and certain. floating offshore installations The requirements in the MODU Code apply for offshore service modules. utilised on floating offshore drilling units including jack up installations This applies irrespective of the time. such modules are installed and used, DNV 2 7 2 is intended to meet the basic safety requirements of SOLAS and MODU code with regard to. escape provision fire detection and fire protection. 1 1 2 DNV Rules for Classification of Ships DNV Offshore Standards. Offshore service modules that are installed on a DNV GL classed offshore Installation may be subject to. classification requirements either in main class or other class notations DNV 2 7 2 includes the basic. requirements of these documents for main class items when applied to temporary installations DNV 2 7. 2 is not intended to replace certification to the DNV Rules for Classification of Ships DNV Offshore Standards. for permanently installed equipment or conversions Equipment needing type approval or product. certification or type approval certificate as defined in DNV Rules for Ships or Offshore Standards shall be. certified in accordance with the relevant rules standard prior to commissioning and use in a DNV 2 7 2. When equipment is located on a DNV GL classed offshore installation it is required to be assessed by DNV. GL to ensure any aspects which interface with a class systems have been correctly installed and to ensure. that general safety principles have been adhered This considers the location integration of the equipment. and confirms that relevant installation and hook up requirements specified in the DNV GL product certificate. have been satisfied It is not the intention of this standard to address the requirements for commissioning. on a DNV GL class unit these remain the responsibility of the vessel offshore unit owner manager. 1 1 3 Relationship to previous revisions of this standard. This revision has been published to provide additional information and clarifications on a limited number of. existing requirements as presented in the May 2013 edition with the intention of simplifying the. implementation of these requirements Minor typing errors have also been corrected in this revision. Design assessment and certification to the previous revision of this standard shall not be conducted six. months following release of this revision, Standard DNVGL ST E272 Edition February 2016 Page 7. SECTION 2 GENERAL,2 1 Objective, The objective of this standard for certification is to set requirements for offshore service modules focussed.
on the safety impact to the offshore installation upon which the equipment is installed. When installed and used on floating offshore installations service containers are subject to the regulations. applicable to an offshore installation i e IMO MODU SOLAS Class flag state and national regulations. When offshore service containers are installed and used on fixed offshore installations national regulations. will apply, It has been recognised that individual interpretations of all the various codes and standards may sometimes. lead to conflicting requirements This standard for certification intends to prescribe solutions which will. provide an equivalent level of safety as the codes and standards referred to throughout this document. Certification by DNV GL provides a document which may be presented to users of the module to document. its technical standard and safety performance The certificate also defines conditions for transportation to. and installation on an offshore installation,2 2 Definitions. Accommodation space, Those used for public spaces corridors lavatories cabins offices hospitals cinemas games and hobbies. rooms pantries containing no cooking appliances and similar spaces Public spaces are those portions of. the accommodation which are used for halls dining rooms lounges and similar permanently enclosed. Guidance note, The term cabins relates to sleeping areas Offices are considered as spaces for paperwork administrative tasks only Facilities for. office work incorporated into the same space as low voltage control monitoring equipment or laboratories without an internal source. of release would not be considered an office accommodation space. e n d of g u i d a n c e n o t e,Category A machinery space.
All spaces which contain internal combustion type machinery used either for main propulsion or for other. purposes where such machinery has in the aggregate a total power of not less than 375 kW or which contain. any oil fired boiler or oil fuel unit and trunks to such spaces. Certified safe equipment, Certified safe equipment is equipment certified by an independent national test institution or competent. body to be in accordance with a recognised standard for electrical apparatus in hazardous areas. Essential safety system, Module integrated systems including required utilities which are provided to prevent detect or warn of an. accidental event and or mitigate its effect This may include. fire and gas detection systems,shutdown systems,PA GA systems. supplies from emergency power or UPS sources,fire protection and extinguishing system. Extreme location, Areas which are out with the range of locations defined for Mid point location.
Doors walls or dampers which will maintain a pressure differential between adjacent areas the allowable. leakage rate will not exceed 0 5 m3 m2h at 50Pa, Standard DNVGL ST E272 Edition February 2016 Page 8. Important services, Services provided by the module to the offshore installation which are critical to the safety of the offshore. installation or modules that prevent protect or mitigate from the effects of an accidental event Examples. may include accommodation units emergency generator units well intervention equipment. Low flame spread,A surface which in accordance with the IMO Fire. 1 1 2 DNV Rules for Classification of Ships DNV Offshore Standards Offshore service modules that are installed on a DNV GL classed offshore Installation may be subject to classification requirements either in main class or other class notations DNV 2 7 2 includes the basic

Related Books