800NT SERIES TANDEM DISC A T O R S M A N U A L

800nt Series Tandem Disc A T O R S M A N U A L-PDF Download

  • Date:24 Dec 2019
  • Views:69
  • Downloads:0
  • Pages:65
  • Size:4.07 MB

Share Pdf : 800nt Series Tandem Disc A T O R S M A N U A L

Download and Preview : 800nt Series Tandem Disc A T O R S M A N U A L


Report CopyRight/DMCA Form For : 800nt Series Tandem Disc A T O R S M A N U A L


Transcription:

WISHEK WARRANTY PROGRAM, Dealer or distributor understands and agrees that Manufacturer extends only the following warranty to customers. In the event Dealer or Distributor extends any additional warranty such as by enlarging the scope or period of. warranty or undertaking a warranty of merchantability or fitness for any particular purpose or any other obligation. whatsoever Dealer or Distributor shall 1 be solely responsible therefore 2 have no recourse against Manufacturer. thereof and 3 defend indemnify and hold Manufacturer harmless against any claim or cause of action whatsoever. arising out of or occasioned by Dealer or Distributor s extension of said additional warranty or obligation. CERTIFICATE OF GENERAL EQUIPMENT WARRANTY, Wishek Mfg L L C warrants new products sold by it to be free from defects in material or workmanship for a period. of one 1 year after date of delivery to the first user and subject to the following conditions Wishek Mfg L L C. obligation and liability under this warranty is expressly limited to repairing or replacing at Wishek Mfg L L C option. any parts that appear to Wishek Mfg L L C upon inspection to have been defective in material or workmanship. Such parts shall be provided at no cost to user at the business establishment of the authorized Wishek Mfg L L C. dealer or distributor of the product during regular business hours This warranty shall not apply to component parts. or accessories of products not manufactured by Wishek Mfg L L C and which carry the warranty of the manufacturer. therof or to normal maintenance such as tune up or to normal maintainence parts such as oil filters Replacement. or repair parts installed in the product covered by this warranty are warranted only for the remainder of this warranty. as if such parts were original of said product WISHEK MFG MAKES NO OTHER WARRANTY EXPRESSED OR. IMPLIED AND MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULR PURPOSE. Wishek Mfg L L C obligation under this warranty shall not include any transportation charges cost of. installation duty taxes or any other charges whatsoever or any liability for direct indirect incidental or consequential. damage or delay If requested by Wishek Mfg L L C products or parts for which warranty claim is made are to be. returned transportation prepaid to Wishek Mfg L L C Any improper use including operation after discovery of. defective or warn parts operation beyond rated capacity substitution or parts not approved by Wishek Mfg L L C. or any alteration or repair by others in such a manner as in Wishek Mfg L L C judgement affects the product. materially and adversely shall void this warranty, NO EMPLOYEE OR REPRESENTATIVE IS AUTHORIZED TO CHANGE THIS WARRANTY IN. ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE IN WRITING. AND SIGNED BY AN OFFICER OF WISHEK MFG L L C AT ITS HOME OFFICE. LIABILITY FOR DELAYS, No liability shall attach to Manufacturer for direct indirect incidental or consequential damages or expenses due to. loss damage detention or delays in delivery of products resulting from acts or delays beyond its control. WARRANTY CLAIMS AND RETURN OF GOODS, 1 The dealer shall submit each warranty claim to the Company within 30 days after the defective part.
has been replaced, 2 The dealer shall furnish the company definite proof of delivery date of the machine to the purchaser. prior to the Company s honoring any warranty claim. 3 All parts alleged to be defective under the Company s warranty policy shall be made available for. examination by the Company either at the dealer s place of business or factory of the Company at the. Company s option If examination is to be at the factory the part shall be returned to the Company with. transportaion charge prepaid only after the dealer receives specific shipping instructions from the Company. 4 Goods authorized for return to the factory are to be returned by dealer within 30 days from authorization. date Failure to return within 30 day perion will invalidate the warranty claim. In order to be protected under the terms of the Warranty or Wishek Manufacturing L L C and to avoid delay in. processing warranty claims the original owners name address and identification numbers of the machine should. be registered at the office of Wishek Mfg L L C within 30 days from from the date of purchase A registration card. is furnished with each machine and can be found on the last page of this booklet. WISHEK ASSEMBLY OPERATOR MANUAL 74295 2 08,TO THE OWNER 5. GENERAL INFORMATION 6 7,SIGNOFF FORM 8,TRACTOR REQUIREMENTS 9. SAFETY 10 13,SPECIFICATIONS 14 15,DECALS 16 17,GENERAL OPERATING. INSTRUTIONS 18 19,TRANSPORT LOCKOUT 20,WING LIFT CIRCUITRY 21.
DEPTH CONTROL CIRCUITRY 22 23,FRONT WING LOCKOUT 24. LEVELING AND SCRAPER ADJUST 25,FIELD SETTING 26,MAINTINENCE LUBRICATION 27 28. GANG BEARINGS 29,WHEEL BEARING 30 31,STORAGE 32,TROUBLE SHOOTING 33. ASSEMBLY INSTRUCTIONS 34 48,BEARING STAND ALIGNMENT 49. GANG ASSEMBLY 50 51,GANG PLACEMENT 51 59,SCRAPER BLADE ASSEMBLY 60 63.
HAZARD LIGHT PLACEMENT 64,WISHEK ASSEMBLY OPERATOR MANUAL 74295 2 08. PERSONAL SAFETY IS IMPORTANT, ALL PERSONNEL INVOLVED WITH THE ASSEMBLY AND OR OPERATION OF THIS EQUIPMENT MUST BE. INFORMED OF PROPER SAFETY PROCEDURES OPERATOR S ASSEMBLY MANUALS PROVIDE THE. NECESSARY INFORMATION IF THE MANUAL IS LOST FOR A PARTICULAR IMPLEMENT ORDER A. REPLACEMENT AT ONCE OPERATOR S AND ASSEMBLY MANUALS ARE AVAILABLE AT NO CHARGE. UPON REQUEST,The Safety Alert symbol,identifies important. safety messages on your,Wishek Disc and in this,This Safety Alert symbol manual When you see. means ATTENTION this symbol be alert to,BECOME ALERT YOUR the possibility of personal.
SAFETY IS INVOLVED injury or death Follow,the instructions in the. safety message,Why is SAFETY important to you,3 Big Reasons Accidents Disable and Kill. Accidents Cost,Accidents Can Be Avoided,SIGNAL WORDS DANGER WARNING CAUTION. Note the use of the signal An immediate and A specific hazard or Unsafe practices which. words DANGER WARNING specific hazard which unsafe practice which COULD result in personal. and CAUTION with the safety WILL result in severe COULD result in severe injury if proper practices. messages The appropriate personal injury or death personal injury or death if are not taken or as a. signal word for each message if the proper precautions the proper precautions reminder of good safety. has been selected using the are not taken are not taken practices. following guidelines,WISHEK ASSEMBLY OPERATOR MANUAL 74295 2 08. It is the responsibility of the user to read the,TO THE OWNER.
Operator s Manual and comply with the safe MODIFICATIONS. and correct operating procedures as pertains,It is the policy of WISHEK to improve its. to the operation lubrication and maintenance,products whenever possible and practical to. of the product according to the information,do so We reserve the right to make changes. outlined in the Operator s Manual,improvements and modifications at any time. If this machine is used by an employee or is without incurring obligation to make such. loaned or rented make certain that the changes improvements on any equipment sold. operator s prior to operating is instructed in previously. safe and proper use and reviews and,understands the Operator s Manual.
The user is responsible for inspecting his her,machine and for having parts repaired or. replaced when continued use of this product,would cause damage or excessive wear to the. other parts The word NOTE is used to convey THIS SYMBOL USED TO CALL YOUR. information that is out of context with the manual ATTENTION TO INSTRUCTIONS. text special information such as specifications CONCERNING YOUR PERSONAL SAFETY. BE SURE TO OBSERVE AND FOLLOW THESE,techniques reference information of. INSTRUCTIONS,supplementary nature,WISHEK MFG PREPARATION. WISHEK NORTH DAKOTA 58495 Before operating the WISHEK 800NT Series. U S PATENT NO 4396070,Disc a careful inspection must become.
CANADIAN PAT NO 1181979,routine A check must be made to ensure that. PATENTED 1985,all hardware and fasteners are securely. tightened and moving parts properly lubricated, MODEL Remove all wires and or banding material The. parts have been conveniently arranged on the,SERIAL NO pallet for ease of assembly. NOTE Always wear safety glasses or goggles,and be careful when cutting wires and steel.
When in need of parts always specify the bands as they are under tension and will spring. model and serial number Write this number in back when cut. the space provided The serial number plate Wherever the terms left and right are used. is located on the main frame front face in the it must be understood to mean from a position. front left corner behind and facing the machine,Lubricate all bearings and moving parts as you. proceed and make sure they work freely,WISHEK ASSEMBLY OPERATOR MANUAL 74295 2 08. GENERAL INFORMATION, Loosely install all bolts connecting GRADE 2 GRADE 5 GRADE 8. mating parts before final tightening,When tightening bolts they must be. torqued to the proper number of foot TORQUE IN FOOT POUNDS. pounds as indicated in the table unless BOLT DIA 3 8 1 2 5 8 3 4 7 8 1. specified It is important that all bolts HEX HEAD 9 16 3 4 15 16 1 1 8 1 5 16 1 1 2. be kept tight UNC GR2 18 45 89 160 252 320, On new machines all nuts and bolts UNC GR5 30 68 140 240 360 544.
must be rechecked after a few hours UNC GR8 40 100 196 340 528 792. of operation UNF GR2 21 51 102 178 272 368,UNF GR5 32 70 168 264 392 572. When replacing a bolt use only a bolt UNF GR8 48 112 216 368 792 840. of the same grade or higher Except,in shear bolt applications where you. must use the same grade bolt, Bolts with no markings are grade 2 Note Do not inflate tires beyond the. specified tire pressure,Grade 5 bolts furnished with the. machine are identified by three radial,lines on the head WHEEL BOLTS.
Grade 8 bolts furnished with the It is recommended that all wheel bolts. machine are identified by six radial be checked for tightness before using. lines on the head and again after one day of use Check. periodically to be sure the wheel bolts,All U bolts are grade 5 are tight. TIRE INFLATION LUBRICATION, The use of proper air pressure is the Make sure the disc is properly. most important factor in satisfactory lubricated See pages 28 30. performance and maintenance of,implement tires Underinflation will. damage the cord body of the tire and HYDRAULICS, cause a series of diagonal breaks in Check wing lift and depth control. the fabric sidewall area cylinders for proper alignment and. If the tire buckles or wrinkles the air operation On any machine check that. pressure must be increased to the the hydraulic system has been. point where the sidwall remains properly charged and purged. WISHEK ASSEMBLY OPERATOR MANUAL 74295 2 08, Remove all wires and or banding When replacing a bolt use only a bolt.
material The parts have been of the same grade or higher Except. conveniently arranged on the pallet in shear bolt applications where you. for ease of assembly must use the same grade bolt, NOTE Always wear safety glasses Bolts with no markings are grade 2. or goggles and be careful when,Grade 5 bolts furnished with the. cutting wires and steel bands as they,machine are identified by three radial. are under tension and will spring back,lines on the head. Grade 8 bolts furnished with the,Wherever the terms left and right.
machine are identified by six radial,are used it must be understood to. lines on the head,mean from a position behind and,facing the machine All U bolts are grade 5. Lubricate all bearings and moving,parts as you proceed and make sure. they work freely,Loosely install all bolts connecting. mating parts before final tightening,THIS SYMBOL USED TO CALL YOUR.
When tightening bolts they must be,ATTENTION TO INSTRUCTIONS. torqued to the proper number of foot CONCERNING YOUR PERSONAL. pounds as indicated in the table SAFETY, unless specified It is important that BE SURE TO OBSERVE AND FOLLOW. all bolts be kept tight See Page 6 THESE INSTRUCTIONS. On new machines all nuts and bolts,must be rechecked after a few hours. of operation,CAUTION Just before and during,operation be sure no one is. Before lowering the wings,for the first time make sure.
on or around the the entire system has been, FAILURE TO FOLLOW THESE implement charged with oil. INSTRUCTIONS MAY RESULT B e f o r e ac t i va t i ng t he With wings down always. IN PERSONAL INJURY AND OR hydraulic system check install hydraulic cylinder. EQUIPMENT DAMAGE hoses for proper channel lock s for. connections transporting 49165,WISHEK ASSEMBLY OPERATOR MANUAL 74295 2 08. SIGN OFF FORM, WISHEK follows the general standard Make periodic reviews of SAFETY. specified by the American Society of and OPERATION a standard practice. Agricultural and Biological Engineers for all your equipment We feel that. ASABE and the Occupational Safety an untrained operator is unqualified to. and Health Administration OSHA operate this machine. Anyone who will be operating and or,A sign off sheet is provided for all. maintaining the 800NT Disc must read,personnel who will be working with.
800nt series tandem disc 112 south 2nd street wishek nd 58495 701 452 2449 grade 2 grade 5 grade 8 torque in foot pounds bolt dia 3 8 1 2 5 8 3 4 7 8 1

Related Books